- 您现在的位置：买卖IC网 > Sheet目录841 > B82464A4682M (EPCOS Inc)INDUCTOR POWER 6.8UH 3.5A SMD
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
7
06/12
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
B82464G4104M
INDUCTOR POWER 100UH 1.05A SMD
B82464Z4684M
INDUCTOR POWER 680UH .42A SMD
B82472G4103M
INDUCTOR POWER 10UH 1.7A SMD
B82476A1102M
INDUCTOR POWER 1.0UH 6.8A SMD
B82477G2474M
INDUCTOR POWER 470UH 580MA SMD
B82477G4103M
INDUCTOR POWER 10UH 5.4A SMD
B82477R4334M100
INDUCTOR POWER 330UH 1.12A SMD
B82479A1473M
INDUCTOR POWER 47UH 2.6A SMD
相关代理商/技术参数
B82464A4683K
功能描述:固定电感器 68uH 1.25A 10% 10x10.4mm SMD
RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
B82464A4683K000
制造商:TDK-EPC 功能描述:INDUCTOR 68UH 1.25A 10% FU
B82464A4684K
功能描述:固定电感器 SMT-INDUCTOR 10X10 680 UH 0.4 A RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
B82464G2102M
制造商:TDK-EPC 功能描述:SMT-INDUCTOR 10X10(LOW)1,0 UH 制造商:TDK-EPC 功能描述:SMT-INDUCTOR 10X101.0UH 5.0A
B82464G2103M
制造商:TDK-EPC 功能描述:SMT-INDUCTOR 10X10(LOW) 10 UH 2,0 A - Tape and Reel 制造商:TDK-EPC 功能描述:SMT-INDUCTOR 10X10 10UH 2.0A
B82464G2103M000
功能描述:固定电感器 SMT-INDUCTOR 10X10 (low) 10UH 2.0A
RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
B82464G2104M
功能描述:固定电感器 SMT-INDUCTOR 10X10 100UH 0.7A RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
B82464G2104M000
制造商:TDK-EPC 功能描述:INDUCTOR POWER 100UH 0.75A 20% 制造商:TDK-EPC 功能描述:INDUCTOR, POWER, 100UH, 0.75A, 20% 制造商:TDK-EPC 功能描述:INDUCTOR, POWER, 100UH, 0.75A, 20% ;ROHS COMPLIANT: YES